Apache MiNiFi C++ 0.3.0 Release Helper Guide

classic Classic list List threaded Threaded
5 messages Options
Reply | Threaded
Open this post in threaded view
|

Apache MiNiFi C++ 0.3.0 Release Helper Guide

Marc Parisi
Hello Apache NiFi community,

Please find the associated guidance to help those interested in
validating/verifying the release so they can vote.

# Download latest KEYS file:
https://dist.apache.org/repos/dist/dev/nifi/KEYS

# Import keys file:
gpg --import KEYS

# Pull down nifi-minifi-cpp-0.3.0 source release artifacts for review:

wget https://dist.apache.org/repos/dist/dev/nifi/nifi-minifi-cpp/
0.3.0/nifi-minifi-cpp-0.3.0-source.tar.gz
wget https://dist.apache.org/repos/dist/dev/nifi/nifi-minifi-cpp/
0.3.0/nifi-minifi-cpp-0.3.0-source.tar.gz.asc
wget https://dist.apache.org/repos/dist/dev/nifi/nifi-minifi-cpp/
0.3.0/nifi-minifi-cpp-0.3.0-source.tar.gz.md5
wget https://dist.apache.org/repos/dist/dev/nifi/nifi-minifi-cpp/
0.3.0/nifi-minifi-cpp-0.3.0-source.tar.gz.sha1
wget https://dist.apache.org/repos/dist/dev/nifi/nifi-minifi-cpp/
0.3.0/nifi-minifi-cpp-0.3.0-source.tar.gz.sha256

# Verify the signature
gpg --verify nifi-minifi-cpp-0.3.0-source.tar.gz.asc

# Verify the hashes (md5, sha1, sha256) match the source and what was
provided in the vote email thread
md5sum nifi-minifi-cpp-0.3.0-source.tar.gz
sha1sum nifi-minifi-cpp-0.3.0-source.tar.gz
sha256sum nifi-minifi-cpp-0.3.0-source.tar.gz

# Untar nifi-minifi-cpp-0.3.0-source.tar.gz
tar xf nifi-minifi-cpp-0.3.0-source.tar.gz

# Verify the build works

Be mindful of the pre-requisites required for the C++ version of MiNiFi,
enumerated in the README [1] and the switching to the CMake build system
These can vary from system to system and distribution, an example of the
package listing for a recent Ubuntu release is:
  cmake gcc g++ libcurl4-openssl-dev uuid-dev uuid libboost-all-dev
libssl-dev doxygen libpython3-dev

Once the required environment is established, a build with testing and
linting can be performed via:

  cd nifi-minifi-cpp-0.3.0-source
  mkdir build
  cd build
  cmake ..
  make package
  make test
  make linter

# Verify the contents contain a good README, NOTICE, and LICENSE.

# Verify the git commit ID is correct

# Verify the RC was branched off the correct git commit ID

# Look at the resulting convenience assembly (nifi-minifi-cpp-0.3.0-bin.tar.gz)
found in your build directory

# Make sure the README, NOTICE, and LICENSE are present and correct

# Run the resulting convenience binary and make sure it works as expected

Be mindful of caveats for this initial release, listed in the README. Since
the convenience binaries include
the scripting extension [2], Python support is needed per our README [1]

For some additional assistance, a package with configuration files for both
a MiNiFI instance and a NiFi instance available at https://cwiki.apache.org/
confluence/display/MINIFI/Releasing+MiNiFi#ReleasingMiNiFi-
SampleNiFiandMiNiFiConfigurationtotransmitdatafromMiNiFitoNiFiviaSitetoSite
The provided sample configuration bundle assumes that NiFi is configured to
listen on port 8081 and has 10001 configured for Site to Site's
nifi.remote.input.socket.port.

# Send a response to the vote thread indicating a +1, 0, -1 based on your
findings.

Thank you for your time and effort to validate the release! Please let me
know if you have any questions or need clarification.

Thanks,
Marc

[1] https://github.com/apache/nifi-minifi-cpp/blob/MINIFICPP-304-RC0-0.3.0/
README.md#system-requirements
[2] https://cwiki.apache.org/confluence/pages/viewpage.
action?pageId=74685143
Reply | Threaded
Open this post in threaded view
|

Re: Apache MiNiFi C++ 0.3.0 Release Helper Guide

trkurc
Administrator
I'm having a bit of trouble with running make test - still diagnosing, but
it is a segfault. (building on an ubuntu 16.04 docker image).

-------------------------------------------------------------------------------
CompressFileBZip
-------------------------------------------------------------------------------
/nifi-minifi-cpp-0.3.0-source/libminifi/test/archive-tests/CompressContentTests.cpp:295
...............................................................................

/nifi-minifi-cpp-0.3.0-source/libminifi/test/archive-tests/CompressContentTests.cpp:295:
FAILED:
  {Unknown expression after the reported line}
due to a fatal error condition:
  SIGSEGV - Segmentation violation signal


On Tue, Nov 21, 2017 at 3:07 PM, Marc <[hidden email]> wrote:

> Hello Apache NiFi community,
>
> Please find the associated guidance to help those interested in
> validating/verifying the release so they can vote.
>
> # Download latest KEYS file:
> https://dist.apache.org/repos/dist/dev/nifi/KEYS
>
> # Import keys file:
> gpg --import KEYS
>
> # Pull down nifi-minifi-cpp-0.3.0 source release artifacts for review:
>
> wget https://dist.apache.org/repos/dist/dev/nifi/nifi-minifi-cpp/
> 0.3.0/nifi-minifi-cpp-0.3.0-source.tar.gz
> wget https://dist.apache.org/repos/dist/dev/nifi/nifi-minifi-cpp/
> 0.3.0/nifi-minifi-cpp-0.3.0-source.tar.gz.asc
> wget https://dist.apache.org/repos/dist/dev/nifi/nifi-minifi-cpp/
> 0.3.0/nifi-minifi-cpp-0.3.0-source.tar.gz.md5
> wget https://dist.apache.org/repos/dist/dev/nifi/nifi-minifi-cpp/
> 0.3.0/nifi-minifi-cpp-0.3.0-source.tar.gz.sha1
> wget https://dist.apache.org/repos/dist/dev/nifi/nifi-minifi-cpp/
> 0.3.0/nifi-minifi-cpp-0.3.0-source.tar.gz.sha256
>
> # Verify the signature
> gpg --verify nifi-minifi-cpp-0.3.0-source.tar.gz.asc
>
> # Verify the hashes (md5, sha1, sha256) match the source and what was
> provided in the vote email thread
> md5sum nifi-minifi-cpp-0.3.0-source.tar.gz
> sha1sum nifi-minifi-cpp-0.3.0-source.tar.gz
> sha256sum nifi-minifi-cpp-0.3.0-source.tar.gz
>
> # Untar nifi-minifi-cpp-0.3.0-source.tar.gz
> tar xf nifi-minifi-cpp-0.3.0-source.tar.gz
>
> # Verify the build works
>
> Be mindful of the pre-requisites required for the C++ version of MiNiFi,
> enumerated in the README [1] and the switching to the CMake build system
> These can vary from system to system and distribution, an example of the
> package listing for a recent Ubuntu release is:
>   cmake gcc g++ libcurl4-openssl-dev uuid-dev uuid libboost-all-dev
> libssl-dev doxygen libpython3-dev
>
> Once the required environment is established, a build with testing and
> linting can be performed via:
>
>   cd nifi-minifi-cpp-0.3.0-source
>   mkdir build
>   cd build
>   cmake ..
>   make package
>   make test
>   make linter
>
> # Verify the contents contain a good README, NOTICE, and LICENSE.
>
> # Verify the git commit ID is correct
>
> # Verify the RC was branched off the correct git commit ID
>
> # Look at the resulting convenience assembly (nifi-minifi-cpp-0.3.0-bin.
> tar.gz)
> found in your build directory
>
> # Make sure the README, NOTICE, and LICENSE are present and correct
>
> # Run the resulting convenience binary and make sure it works as expected
>
> Be mindful of caveats for this initial release, listed in the README. Since
> the convenience binaries include
> the scripting extension [2], Python support is needed per our README [1]
>
> For some additional assistance, a package with configuration files for both
> a MiNiFI instance and a NiFi instance available at
> https://cwiki.apache.org/
> confluence/display/MINIFI/Releasing+MiNiFi#ReleasingMiNiFi-
> SampleNiFiandMiNiFiConfigurationtotransmitdatafromMiNiFitoNi
> FiviaSitetoSite
> The provided sample configuration bundle assumes that NiFi is configured to
> listen on port 8081 and has 10001 configured for Site to Site's
> nifi.remote.input.socket.port.
>
> # Send a response to the vote thread indicating a +1, 0, -1 based on your
> findings.
>
> Thank you for your time and effort to validate the release! Please let me
> know if you have any questions or need clarification.
>
> Thanks,
> Marc
>
> [1] https://github.com/apache/nifi-minifi-cpp/blob/
> MINIFICPP-304-RC0-0.3.0/
> README.md#system-requirements
> [2] https://cwiki.apache.org/confluence/pages/viewpage.
> action?pageId=74685143
>
Reply | Threaded
Open this post in threaded view
|

Re: Apache MiNiFi C++ 0.3.0 Release Helper Guide

Marc P.
Tony,
  Try adding libbz2-dev liblzma-dev to your distro if you haven't already.
I don't think I correctly copied the command for apt-get. My apologies.

On Wed, Nov 22, 2017 at 4:26 PM, Tony Kurc <[hidden email]> wrote:

> I'm having a bit of trouble with running make test - still diagnosing, but
> it is a segfault. (building on an ubuntu 16.04 docker image).
>
> ------------------------------------------------------------
> -------------------
> CompressFileBZip
> ------------------------------------------------------------
> -------------------
> /nifi-minifi-cpp-0.3.0-source/libminifi/test/archive-tests/
> CompressContentTests.cpp:295
> ............................................................
> ...................
>
> /nifi-minifi-cpp-0.3.0-source/libminifi/test/archive-tests/
> CompressContentTests.cpp:295:
> FAILED:
>   {Unknown expression after the reported line}
> due to a fatal error condition:
>   SIGSEGV - Segmentation violation signal
>
>
> On Tue, Nov 21, 2017 at 3:07 PM, Marc <[hidden email]> wrote:
>
> > Hello Apache NiFi community,
> >
> > Please find the associated guidance to help those interested in
> > validating/verifying the release so they can vote.
> >
> > # Download latest KEYS file:
> > https://dist.apache.org/repos/dist/dev/nifi/KEYS
> >
> > # Import keys file:
> > gpg --import KEYS
> >
> > # Pull down nifi-minifi-cpp-0.3.0 source release artifacts for review:
> >
> > wget https://dist.apache.org/repos/dist/dev/nifi/nifi-minifi-cpp/
> > 0.3.0/nifi-minifi-cpp-0.3.0-source.tar.gz
> > wget https://dist.apache.org/repos/dist/dev/nifi/nifi-minifi-cpp/
> > 0.3.0/nifi-minifi-cpp-0.3.0-source.tar.gz.asc
> > wget https://dist.apache.org/repos/dist/dev/nifi/nifi-minifi-cpp/
> > 0.3.0/nifi-minifi-cpp-0.3.0-source.tar.gz.md5
> > wget https://dist.apache.org/repos/dist/dev/nifi/nifi-minifi-cpp/
> > 0.3.0/nifi-minifi-cpp-0.3.0-source.tar.gz.sha1
> > wget https://dist.apache.org/repos/dist/dev/nifi/nifi-minifi-cpp/
> > 0.3.0/nifi-minifi-cpp-0.3.0-source.tar.gz.sha256
> >
> > # Verify the signature
> > gpg --verify nifi-minifi-cpp-0.3.0-source.tar.gz.asc
> >
> > # Verify the hashes (md5, sha1, sha256) match the source and what was
> > provided in the vote email thread
> > md5sum nifi-minifi-cpp-0.3.0-source.tar.gz
> > sha1sum nifi-minifi-cpp-0.3.0-source.tar.gz
> > sha256sum nifi-minifi-cpp-0.3.0-source.tar.gz
> >
> > # Untar nifi-minifi-cpp-0.3.0-source.tar.gz
> > tar xf nifi-minifi-cpp-0.3.0-source.tar.gz
> >
> > # Verify the build works
> >
> > Be mindful of the pre-requisites required for the C++ version of MiNiFi,
> > enumerated in the README [1] and the switching to the CMake build system
> > These can vary from system to system and distribution, an example of the
> > package listing for a recent Ubuntu release is:
> >   cmake gcc g++ libcurl4-openssl-dev uuid-dev uuid libboost-all-dev
> > libssl-dev doxygen libpython3-dev
> >
> > Once the required environment is established, a build with testing and
> > linting can be performed via:
> >
> >   cd nifi-minifi-cpp-0.3.0-source
> >   mkdir build
> >   cd build
> >   cmake ..
> >   make package
> >   make test
> >   make linter
> >
> > # Verify the contents contain a good README, NOTICE, and LICENSE.
> >
> > # Verify the git commit ID is correct
> >
> > # Verify the RC was branched off the correct git commit ID
> >
> > # Look at the resulting convenience assembly (nifi-minifi-cpp-0.3.0-bin.
> > tar.gz)
> > found in your build directory
> >
> > # Make sure the README, NOTICE, and LICENSE are present and correct
> >
> > # Run the resulting convenience binary and make sure it works as expected
> >
> > Be mindful of caveats for this initial release, listed in the README.
> Since
> > the convenience binaries include
> > the scripting extension [2], Python support is needed per our README [1]
> >
> > For some additional assistance, a package with configuration files for
> both
> > a MiNiFI instance and a NiFi instance available at
> > https://cwiki.apache.org/
> > confluence/display/MINIFI/Releasing+MiNiFi#ReleasingMiNiFi-
> > SampleNiFiandMiNiFiConfigurationtotransmitdatafromMiNiFitoNi
> > FiviaSitetoSite
> > The provided sample configuration bundle assumes that NiFi is configured
> to
> > listen on port 8081 and has 10001 configured for Site to Site's
> > nifi.remote.input.socket.port.
> >
> > # Send a response to the vote thread indicating a +1, 0, -1 based on your
> > findings.
> >
> > Thank you for your time and effort to validate the release! Please let me
> > know if you have any questions or need clarification.
> >
> > Thanks,
> > Marc
> >
> > [1] https://github.com/apache/nifi-minifi-cpp/blob/
> > MINIFICPP-304-RC0-0.3.0/
> > README.md#system-requirements
> > [2] https://cwiki.apache.org/confluence/pages/viewpage.
> > action?pageId=74685143
> >
>
Reply | Threaded
Open this post in threaded view
|

Re: Apache MiNiFi C++ 0.3.0 Release Helper Guide

Marc Parisi
Tony,
  I hit send before adding the full commands.

  sudo apt-get install libbz2-dev liblzma-dev .

  That would make the command in the helper guide:

   sudo apt-get  cmake gcc g++ libcurl4-openssl-dev uuid-dev uuid
libboost-all-dev libssl-dev doxygen libpython3-dev libbz2-dev liblzma-dev .

   Let me know if that helps and apologies for the omission.

  Thanks,
   Marc

On Wed, Nov 22, 2017 at 5:06 PM, Marc P. <[hidden email]> wrote:

> Tony,
>   Try adding libbz2-dev liblzma-dev to your distro if you haven't already.
> I don't think I correctly copied the command for apt-get. My apologies.
>
> On Wed, Nov 22, 2017 at 4:26 PM, Tony Kurc <[hidden email]> wrote:
>
>> I'm having a bit of trouble with running make test - still diagnosing, but
>> it is a segfault. (building on an ubuntu 16.04 docker image).
>>
>> ------------------------------------------------------------
>> -------------------
>> CompressFileBZip
>> ------------------------------------------------------------
>> -------------------
>> /nifi-minifi-cpp-0.3.0-source/libminifi/test/archive-tests/C
>> ompressContentTests.cpp:295
>> ............................................................
>> ...................
>>
>> /nifi-minifi-cpp-0.3.0-source/libminifi/test/archive-tests/C
>> ompressContentTests.cpp:295:
>> FAILED:
>>   {Unknown expression after the reported line}
>> due to a fatal error condition:
>>   SIGSEGV - Segmentation violation signal
>>
>>
>> On Tue, Nov 21, 2017 at 3:07 PM, Marc <[hidden email]> wrote:
>>
>> > Hello Apache NiFi community,
>> >
>> > Please find the associated guidance to help those interested in
>> > validating/verifying the release so they can vote.
>> >
>> > # Download latest KEYS file:
>> > https://dist.apache.org/repos/dist/dev/nifi/KEYS
>> >
>> > # Import keys file:
>> > gpg --import KEYS
>> >
>> > # Pull down nifi-minifi-cpp-0.3.0 source release artifacts for review:
>> >
>> > wget https://dist.apache.org/repos/dist/dev/nifi/nifi-minifi-cpp/
>> > 0.3.0/nifi-minifi-cpp-0.3.0-source.tar.gz
>> > wget https://dist.apache.org/repos/dist/dev/nifi/nifi-minifi-cpp/
>> > 0.3.0/nifi-minifi-cpp-0.3.0-source.tar.gz.asc
>> > wget https://dist.apache.org/repos/dist/dev/nifi/nifi-minifi-cpp/
>> > 0.3.0/nifi-minifi-cpp-0.3.0-source.tar.gz.md5
>> > wget https://dist.apache.org/repos/dist/dev/nifi/nifi-minifi-cpp/
>> > 0.3.0/nifi-minifi-cpp-0.3.0-source.tar.gz.sha1
>> > wget https://dist.apache.org/repos/dist/dev/nifi/nifi-minifi-cpp/
>> > 0.3.0/nifi-minifi-cpp-0.3.0-source.tar.gz.sha256
>> >
>> > # Verify the signature
>> > gpg --verify nifi-minifi-cpp-0.3.0-source.tar.gz.asc
>> >
>> > # Verify the hashes (md5, sha1, sha256) match the source and what was
>> > provided in the vote email thread
>> > md5sum nifi-minifi-cpp-0.3.0-source.tar.gz
>> > sha1sum nifi-minifi-cpp-0.3.0-source.tar.gz
>> > sha256sum nifi-minifi-cpp-0.3.0-source.tar.gz
>> >
>> > # Untar nifi-minifi-cpp-0.3.0-source.tar.gz
>> > tar xf nifi-minifi-cpp-0.3.0-source.tar.gz
>> >
>> > # Verify the build works
>> >
>> > Be mindful of the pre-requisites required for the C++ version of MiNiFi,
>> > enumerated in the README [1] and the switching to the CMake build system
>> > These can vary from system to system and distribution, an example of the
>> > package listing for a recent Ubuntu release is:
>> >   cmake gcc g++ libcurl4-openssl-dev uuid-dev uuid libboost-all-dev
>> > libssl-dev doxygen libpython3-dev
>> >
>> > Once the required environment is established, a build with testing and
>> > linting can be performed via:
>> >
>> >   cd nifi-minifi-cpp-0.3.0-source
>> >   mkdir build
>> >   cd build
>> >   cmake ..
>> >   make package
>> >   make test
>> >   make linter
>> >
>> > # Verify the contents contain a good README, NOTICE, and LICENSE.
>> >
>> > # Verify the git commit ID is correct
>> >
>> > # Verify the RC was branched off the correct git commit ID
>> >
>> > # Look at the resulting convenience assembly (nifi-minifi-cpp-0.3.0-bin.
>> > tar.gz)
>> > found in your build directory
>> >
>> > # Make sure the README, NOTICE, and LICENSE are present and correct
>> >
>> > # Run the resulting convenience binary and make sure it works as
>> expected
>> >
>> > Be mindful of caveats for this initial release, listed in the README.
>> Since
>> > the convenience binaries include
>> > the scripting extension [2], Python support is needed per our README [1]
>> >
>> > For some additional assistance, a package with configuration files for
>> both
>> > a MiNiFI instance and a NiFi instance available at
>> > https://cwiki.apache.org/
>> > confluence/display/MINIFI/Releasing+MiNiFi#ReleasingMiNiFi-
>> > SampleNiFiandMiNiFiConfigurationtotransmitdatafromMiNiFitoNi
>> > FiviaSitetoSite
>> > The provided sample configuration bundle assumes that NiFi is
>> configured to
>> > listen on port 8081 and has 10001 configured for Site to Site's
>> > nifi.remote.input.socket.port.
>> >
>> > # Send a response to the vote thread indicating a +1, 0, -1 based on
>> your
>> > findings.
>> >
>> > Thank you for your time and effort to validate the release! Please let
>> me
>> > know if you have any questions or need clarification.
>> >
>> > Thanks,
>> > Marc
>> >
>> > [1] https://github.com/apache/nifi-minifi-cpp/blob/
>> > MINIFICPP-304-RC0-0.3.0/
>> > README.md#system-requirements
>> > [2] https://cwiki.apache.org/confluence/pages/viewpage.
>> > action?pageId=74685143
>> >
>>
>
>
Reply | Threaded
Open this post in threaded view
|

Re: Apache MiNiFi C++ 0.3.0 Release Helper Guide

trkurc
Administrator
Thanks, I narrowed it down to not having libbz2 for that failure, liblzma
will save me another round of building.


On Wed, Nov 22, 2017 at 5:08 PM, Marc <[hidden email]> wrote:

> Tony,
>   I hit send before adding the full commands.
>
>   sudo apt-get install libbz2-dev liblzma-dev .
>
>   That would make the command in the helper guide:
>
>    sudo apt-get  cmake gcc g++ libcurl4-openssl-dev uuid-dev uuid
> libboost-all-dev libssl-dev doxygen libpython3-dev libbz2-dev liblzma-dev .
>
>    Let me know if that helps and apologies for the omission.
>
>   Thanks,
>    Marc
>
> On Wed, Nov 22, 2017 at 5:06 PM, Marc P. <[hidden email]> wrote:
>
> > Tony,
> >   Try adding libbz2-dev liblzma-dev to your distro if you haven't
> already.
> > I don't think I correctly copied the command for apt-get. My apologies.
> >
> > On Wed, Nov 22, 2017 at 4:26 PM, Tony Kurc <[hidden email]> wrote:
> >
> >> I'm having a bit of trouble with running make test - still diagnosing,
> but
> >> it is a segfault. (building on an ubuntu 16.04 docker image).
> >>
> >> ------------------------------------------------------------
> >> -------------------
> >> CompressFileBZip
> >> ------------------------------------------------------------
> >> -------------------
> >> /nifi-minifi-cpp-0.3.0-source/libminifi/test/archive-tests/C
> >> ompressContentTests.cpp:295
> >> ............................................................
> >> ...................
> >>
> >> /nifi-minifi-cpp-0.3.0-source/libminifi/test/archive-tests/C
> >> ompressContentTests.cpp:295:
> >> FAILED:
> >>   {Unknown expression after the reported line}
> >> due to a fatal error condition:
> >>   SIGSEGV - Segmentation violation signal
> >>
> >>
> >> On Tue, Nov 21, 2017 at 3:07 PM, Marc <[hidden email]> wrote:
> >>
> >> > Hello Apache NiFi community,
> >> >
> >> > Please find the associated guidance to help those interested in
> >> > validating/verifying the release so they can vote.
> >> >
> >> > # Download latest KEYS file:
> >> > https://dist.apache.org/repos/dist/dev/nifi/KEYS
> >> >
> >> > # Import keys file:
> >> > gpg --import KEYS
> >> >
> >> > # Pull down nifi-minifi-cpp-0.3.0 source release artifacts for review:
> >> >
> >> > wget https://dist.apache.org/repos/dist/dev/nifi/nifi-minifi-cpp/
> >> > 0.3.0/nifi-minifi-cpp-0.3.0-source.tar.gz
> >> > wget https://dist.apache.org/repos/dist/dev/nifi/nifi-minifi-cpp/
> >> > 0.3.0/nifi-minifi-cpp-0.3.0-source.tar.gz.asc
> >> > wget https://dist.apache.org/repos/dist/dev/nifi/nifi-minifi-cpp/
> >> > 0.3.0/nifi-minifi-cpp-0.3.0-source.tar.gz.md5
> >> > wget https://dist.apache.org/repos/dist/dev/nifi/nifi-minifi-cpp/
> >> > 0.3.0/nifi-minifi-cpp-0.3.0-source.tar.gz.sha1
> >> > wget https://dist.apache.org/repos/dist/dev/nifi/nifi-minifi-cpp/
> >> > 0.3.0/nifi-minifi-cpp-0.3.0-source.tar.gz.sha256
> >> >
> >> > # Verify the signature
> >> > gpg --verify nifi-minifi-cpp-0.3.0-source.tar.gz.asc
> >> >
> >> > # Verify the hashes (md5, sha1, sha256) match the source and what was
> >> > provided in the vote email thread
> >> > md5sum nifi-minifi-cpp-0.3.0-source.tar.gz
> >> > sha1sum nifi-minifi-cpp-0.3.0-source.tar.gz
> >> > sha256sum nifi-minifi-cpp-0.3.0-source.tar.gz
> >> >
> >> > # Untar nifi-minifi-cpp-0.3.0-source.tar.gz
> >> > tar xf nifi-minifi-cpp-0.3.0-source.tar.gz
> >> >
> >> > # Verify the build works
> >> >
> >> > Be mindful of the pre-requisites required for the C++ version of
> MiNiFi,
> >> > enumerated in the README [1] and the switching to the CMake build
> system
> >> > These can vary from system to system and distribution, an example of
> the
> >> > package listing for a recent Ubuntu release is:
> >> >   cmake gcc g++ libcurl4-openssl-dev uuid-dev uuid libboost-all-dev
> >> > libssl-dev doxygen libpython3-dev
> >> >
> >> > Once the required environment is established, a build with testing and
> >> > linting can be performed via:
> >> >
> >> >   cd nifi-minifi-cpp-0.3.0-source
> >> >   mkdir build
> >> >   cd build
> >> >   cmake ..
> >> >   make package
> >> >   make test
> >> >   make linter
> >> >
> >> > # Verify the contents contain a good README, NOTICE, and LICENSE.
> >> >
> >> > # Verify the git commit ID is correct
> >> >
> >> > # Verify the RC was branched off the correct git commit ID
> >> >
> >> > # Look at the resulting convenience assembly
> (nifi-minifi-cpp-0.3.0-bin.
> >> > tar.gz)
> >> > found in your build directory
> >> >
> >> > # Make sure the README, NOTICE, and LICENSE are present and correct
> >> >
> >> > # Run the resulting convenience binary and make sure it works as
> >> expected
> >> >
> >> > Be mindful of caveats for this initial release, listed in the README.
> >> Since
> >> > the convenience binaries include
> >> > the scripting extension [2], Python support is needed per our README
> [1]
> >> >
> >> > For some additional assistance, a package with configuration files for
> >> both
> >> > a MiNiFI instance and a NiFi instance available at
> >> > https://cwiki.apache.org/
> >> > confluence/display/MINIFI/Releasing+MiNiFi#ReleasingMiNiFi-
> >> > SampleNiFiandMiNiFiConfigurationtotransmitdatafromMiNiFitoNi
> >> > FiviaSitetoSite
> >> > The provided sample configuration bundle assumes that NiFi is
> >> configured to
> >> > listen on port 8081 and has 10001 configured for Site to Site's
> >> > nifi.remote.input.socket.port.
> >> >
> >> > # Send a response to the vote thread indicating a +1, 0, -1 based on
> >> your
> >> > findings.
> >> >
> >> > Thank you for your time and effort to validate the release! Please let
> >> me
> >> > know if you have any questions or need clarification.
> >> >
> >> > Thanks,
> >> > Marc
> >> >
> >> > [1] https://github.com/apache/nifi-minifi-cpp/blob/
> >> > MINIFICPP-304-RC0-0.3.0/
> >> > README.md#system-requirements
> >> > [2] https://cwiki.apache.org/confluence/pages/viewpage.
> >> > action?pageId=74685143
> >> >
> >>
> >
> >
>